Welcome
Teams
Maintainers
Contacts

bluez-firmware build log (i386)

Build succeed

autodetected possible error in log

log

W: /home/goneri/.pbuilderrc does not exist
I: using fakeroot in build.
Current time: Thu May 1 15:26:09 CEST 2008
pbuilder-time-stamp: 1209648369
Building the build Environment
-> extracting base tarball [/home/goneri/svnbuildstat/tmp/pbuilder/sid.tar.gz]
-> creating local configuration
-> copying local configuration
-> mounting /proc filesystem
-> mounting /dev/pts filesystem
-> policy-rc.d already exists
Obtaining the cached apt archive contents
Installing the build-deps
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: i386
Maintainer: Debian Pbuilder Team
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder and should
Depends: debhelper (>= 5), autotools-dev, cdbs
dpkg-deb: building package `pbuilder-satisfydepends-dummy' in `/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Reading package lists...
Building dependency tree...
Reading state information...
aptitude is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Selecting previously deselected package pbuilder-satisfydepends-dummy.
(Reading database ... 9309 files and directories currently installed.)
Unpacking pbuilder-satisfydepends-dummy (from .../pbuilder-satisfydepends-dummy.deb) ...
dpkg: dependency problems prevent configuration of pbuilder-satisfydepends-dummy:
pbuilder-satisfydepends-dummy depends on debhelper (>= 5); however:
Package debhelper is not installed.
pbuilder-satisfydepends-dummy depends on autotools-dev; however:
Package autotools-dev is not installed.
pbuilder-satisfydepends-dummy depends on cdbs; however:
Package cdbs is not installed.
dpkg: error processing pbuilder-satisfydepends-dummy (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
pbuilder-satisfydepends-dummy
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
The following NEW packages will be installed:
autotools-dev{a} bsdmainutils{a} cdbs{a} debhelper{a} file{a} gettext{a}
gettext-base{a} groff-base{a} html2text{a} intltool-debian{a} libgomp1{a}
libmagic1{a} man-db{a} po-debconf{a}
The following partially installed packages will be configured:
pbuilder-satisfydepends-dummy
0 packages upgraded, 14 newly installed, 0 to remove and 1 not upgraded.
Need to get 0B/7104kB of archives. After unpacking 20.2MB will be used.
Writing extended state information...
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously deselected package libmagic1.
(Reading database ... 9309 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.23-2_i386.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.23-2_i386.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-3_i386.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.17-2_i386.deb) ...
Selecting previously deselected package libgomp1.
Unpacking libgomp1 (from .../libgomp1_4.3.0-3_i386.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.17-2_i386.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.12.1_all.deb) ...
Selecting previously deselected package groff-base.
Unpacking groff-base (from .../groff-base_1.18.1.1-20_i386.deb) ...
Selecting previously deselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_6.1.10_i386.deb) ...
Selecting previously deselected package man-db.
Unpacking man-db (from .../man-db_2.5.1-4_i386.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_7.0.4_all.deb) ...
Selecting previously deselected package autotools-dev.
Unpacking autotools-dev (from .../autotools-dev_20080123.1_all.deb) ...
Selecting previously deselected package cdbs.
Unpacking cdbs (from .../archives/cdbs_0.4.52_all.deb) ...
Setting up libmagic1 (4.23-2) ...
Setting up file (4.23-2) ...
Setting up html2text (1.3.2a-3) ...
Setting up gettext-base (0.17-2) ...
Setting up libgomp1 (4.3.0-3) ...
Setting up gettext (0.17-2) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.12.1) ...
Setting up groff-base (1.18.1.1-20) ...
Setting up bsdmainutils (6.1.10) ...
Setting up man-db (2.5.1-4) ...
Building database of manual pages ...
Setting up debhelper (7.0.4) ...
Setting up autotools-dev (20080123.1) ...
Setting up cdbs (0.4.52) ...
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
fakeroot
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 0B/113kB of archives.
After this operation, 365kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
(Reading database ... 10487 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.9.5_i386.deb) ...
Processing triggers for man-db ...
Setting up fakeroot (1.9.5) ...
Copying back the cached apt archive contents
Copying source file
-> copying [/home/goneri/svnbuildstat/tmp/workplace/20636/bluez-firmware_1.2-2.dsc]
-> copying [/home/goneri/svnbuildstat/tmp/workplace/20636/bluez-firmware_1.2.orig.tar.gz]
-> copying [/home/goneri/svnbuildstat/tmp/workplace/20636/bluez-firmware_1.2-2.diff.gz]
Extracting source
dpkg-source: warning: extracting unsigned source package (bluez-firmware_1.2-2.dsc)
dpkg-source: extracting bluez-firmware in bluez-firmware-1.2
dpkg-source: info: unpacking bluez-firmware_1.2.orig.tar.gz
dpkg-source: info: applying bluez-firmware_1.2-2.diff.gz
-> Building the package
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package bluez-firmware
dpkg-buildpackage: source version 1.2-2
dpkg-buildpackage: source changed by Filippo Giunchedi
dpkg-buildpackage: host architecture i386
fakeroot debian/rules clean
test -x debian/rules
test "`id -u`" = 0
/usr/bin/make -f debian/rules reverse-config
make[1]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi
patches:
if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi
if [ "reverse-patches" != "reverse-patches" ] ; then \
/usr/bin/make -f debian/rules update-config ; \
fi
for dir in debian/patches ; do \
rm -f $dir/*.log ; \
done
dh_clean
/usr/bin/make -C . -k distclean
make[1]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[1]: *** No rule to make target `distclean'.
make[1]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
make: [makefile-clean] Error 2 (ignored)
rm -f debian/stamp-makefile-build
rm -f debian/stamp-autotools-files
dpkg-source -b bluez-firmware-1.2
dpkg-source: info: using source format `1.0'
dpkg-source: info: building bluez-firmware using existing bluez-firmware_1.2.orig.tar.gz
dpkg-source: info: building bluez-firmware in bluez-firmware_1.2-2.diff.gz
dpkg-source: warning: file bluez-firmware-1.2/debian/rev has no final newline (either original or modified version)
dpkg-source: info: building bluez-firmware in bluez-firmware_1.2-2.dsc
debian/rules build
test -x debian/rules
mkdir -p "."
/usr/bin/make -f debian/rules reverse-config
make[1]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi
patches:
if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi
if [ "debian/stamp-patched" != "reverse-patches" ] ; then \
/usr/bin/make -f debian/rules update-config ; \
fi
make[1]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[1]: Nothing to be done for `update-config'.
make[1]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
touch debian/stamp-autotools-files
chmod a+x /tmp/buildd/bluez-firmware-1.2/./configure
cd . && CC="cc" CXX="g++" CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="" /tmp/buildd/bluez-firmware-1.2/./configure --build=i486-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/bluez-firmware" --disable-maintainer-mode --disable-dependency-tracking --srcdir=. --libdir=/lib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a BSD-compatible install... /usr/bin/install -c
configure: creating ./config.status
config.status: creating Makefile
/usr/bin/make -C .
make[1]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
touch debian/stamp-makefile-build
DEB_MAKE_CHECK_TARGET unset, not running checks
fakeroot debian/rules binary
test -x debian/rules
test "`id -u`" = 0
dh_clean -k
dh_installdirs -A
mkdir -p "."
DEB_MAKE_CHECK_TARGET unset, not running checks
/usr/bin/make -C . install DESTDIR=/tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware/
make[1]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[2]: Entering directory `/tmp/buildd/bluez-firmware-1.2'
make[2]: Nothing to be done for `install-exec-am'.
/bin/sh ./mkinstalldirs /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware
mkdir -p -- /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware
/usr/bin/install -c -m 644 broadcom/BCM2033-MD.hex /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/BCM2033-MD.hex
/usr/bin/install -c -m 644 broadcom/BCM2033-FW.bin /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/BCM2033-FW.bin
/usr/bin/install -c -m 644 broadcom/BCM-LEGAL.txt /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/BCM-LEGAL.txt
/usr/bin/install -c -m 644 st/STLC2500_R4_00_03.ptc /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/STLC2500_R4_00_03.ptc
/usr/bin/install -c -m 644 st/STLC2500_R4_00_06.ssf /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/STLC2500_R4_00_06.ssf
/usr/bin/install -c -m 644 st/STLC2500_R4_02_02_WLAN.ssf /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/STLC2500_R4_02_02_WLAN.ssf
/usr/bin/install -c -m 644 st/STLC2500_R4_02_04.ptc /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware//lib/firmware/STLC2500_R4_02_04.ptc
make[2]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
make[1]: Leaving directory `/tmp/buildd/bluez-firmware-1.2'
dh_installdirs -pbluez-firmware
mkdir -p /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware/usr/share/doc/bluez-firmware
mv /tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware/lib/firmware/BCM-LEGAL.txt \
/tmp/buildd/bluez-firmware-1.2/debian/bluez-firmware/usr/share/doc/bluez-firmware/
dh_installdocs -pbluez-firmware ./README ./AUTHORS
dh_installexamples -pbluez-firmware
dh_installman -pbluez-firmware
dh_installinfo -pbluez-firmware
dh_installmenu -pbluez-firmware
dh_installcron -pbluez-firmware
dh_installinit -pbluez-firmware
dh_installdebconf -pbluez-firmware
dh_installemacsen -pbluez-firmware
dh_installcatalogs -pbluez-firmware
dh_installpam -pbluez-firmware
dh_installlogrotate -pbluez-firmware
dh_installlogcheck -pbluez-firmware
dh_installchangelogs -pbluez-firmware ./ChangeLog
dh_installudev -pbluez-firmware
dh_lintian -pbluez-firmware
dh_install -pbluez-firmware
dh_link -pbluez-firmware
dh_installmime -pbluez-firmware
dh_strip -pbluez-firmware
dh_compress -pbluez-firmware
dh_fixperms -pbluez-firmware
dh_makeshlibs -pbluez-firmware
dh_installdeb -pbluez-firmware
dh_perl -pbluez-firmware
dh_shlibdeps -pbluez-firmware
dh_gencontrol -pbluez-firmware
dpkg-gencontrol: warning: unknown substitution variable ${shlibs:Depends}
dh_md5sums -pbluez-firmware
dh_builddeb -pbluez-firmware
dpkg-deb: building package `bluez-firmware' in `../bluez-firmware_1.2-2_all.deb'.
dpkg-genchanges >../bluez-firmware_1.2-2_i386.changes
dpkg-genchanges: not including original source code in upload
dpkg-buildpackage: binary and diff upload (original source NOT included)
Copying back the cached apt archive contents
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
-> cleaning the build env
-> removing directory /home/goneri/svnbuildstat/tmp/pbuilder/23042 and its subdirectories
Current time: Thu May 1 15:31:30 CEST 2008
pbuilder-time-stamp: 1209648690